Technical specifications pro-ject dac box tv, Service, Warranty – Pro-Ject Audio Systems DAC Box TV User Manual

Page 3: Copyright, trademarks

Technical specifications Pro-Ject DAC Box TV

Line-level output:

1 pair RCA/phono sockets

Output voltage:

0,7Vrms

Digital outputs:

1 x coaxial (S/PDIF),

1 x optical (TOSlink

)

D/A converter:

Texas Instruments TLV320DAC23

Cirrus Logic CS4344. 24Bit/192kHz

Supported audio format:

PCM (LPCM). No support for multi channel formats like Dolby

AC-3 or DTS

™

Sampling rates

Optical and coaxial input:

44,1kHz, 48kHz und 96kHz

Outboard power supply:

5V/1.000mA DC; suitable for your country's mains supply

Power consumption:

200mA DC, <1W in standby

Dimensions W x H x D (D with sockets): 107 x 30 x 64 (75)mm
Weight:

290g without power supply

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the

unit be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

PRO-JECT is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Audio Trade GmbH
Copyright

The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing

process of technical development.

TOSlink

is a registered trademark of Toshiba corporation. Dolby

is a registered trademarks of Dolby

Laboratories. DTS

™

is a registered trademark of DTS, Inc..