Pro-Ject Audio Systems Media Box S User Manual

Page 4

Stepping between tracks, reverse and forward scanning

skips to the next track

restarts the current track in playback mode

Press and hold the

button for reverse scanning, or the button

to start forward scanning.

Front panel controls

Media Box S

To switch on from standby or to standby

The push button on the left hand side will toggle the player between its fully operational status and standby.
The blue LED above the stand-by push button shows that the unit is switched on. The display shows STANDBY
when the unit is in standby.
If there is no SD card inserted, or no USB-device connected, the unit will returns to standby automatically.

After switching to standby, the display shows the current software version.

Navigating the menu and playlists, main menu

and move the curser up and down, to highlight the requested option in menus and playlists.

displays the main menu and starts playback of a selected track in a playlist.

Play / Pause

Pressing starts and pauses playback. Restarts playback from the same position after stopping.

displays the playlist. starts playback of a selected track in a playlist. Starts playback of the next track.

Replacing batteries

Proceed as follows:

 Unlock and slide open the battery case cover

 Replace the battery.

Make sure the battery is the right way round !

 Close the battery case cover

Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V

Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.