Technical specifications pro-ject bluetooth box s, Service, Warranty – Pro-Ject Audio Systems Bluetooth Box S User Manual

Page 4: Copyright, trademarks

Technical specifications Pro-Ject Bluetooth Box S

Effective working range: up to 10m (direct visibility)
Bluetooth Profile :

A2DP

Supported codecs:

aptX, SBC

Frequency:

2402 ~ 2480 MHz

Sensitivity:

- 84dBm

Maximum received signal at 0.1% BER:

> = -10dBm

Maximum level of inter modulation interference: >= -30dBm
Spurious output level:

-156dBm/Hz

Audio Output Level (nominal):

2 Vrms

Frequency response:

20Hz - 20Khz

SNR (nominal, Audio RL):

> 100 dB

THD (nominal, Audio RL):

0.02% (aptX)

Analog output:

1 pair RCA/cinch

Digital output:

1x coaxial (RCA/cinch), 1x optical (Toslink

)

Dimensions W x H x D (D with sockets):

103 x 36 x 104 (109)mm

Weight:

576g

Outboard power supply:

9V/300mA

Power consumption:

9V/100mA max.

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible
distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or changes to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a registered Trademark of
H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems
Copyright

The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.