Remote control – Pro-Ject Audio Systems DAC Box RS User Manual

Page 3

Digital inputs

Sources with an digital output such as a CD player can be connected to the digital inputs (coaxial, optical and
symmetrical). A computer can be connected to the USB input.

The DAC supports PCM (LPCM) and DSD format only. The DAC does not work with audio formats

like DTS

™

or Dolby

Digital. If the DAC is used with a TV satellite/cable receiver or a TV sets with an

integrated satellite/cable receiver, make sure that in the set-up menu of your receiver/TV set, the

format of the digital signal, relayed to the digital output used is set to PCM.

Connecting to a Computer

Connect the USB-input of the DAC (unit must be switched on) to a free USB-socket on your computer and
turn it on/make sure it is powered on.
* For Windows

operating systems an USB driver (supplied on CD) has to be installed. Mac OS

operating

systems do not need an additional driver.

Please note: Connection should be made to an USB-socket of your computer directly. Connecting to

USB-hubs can cause problems.

Mains power connection

Connect the low voltage plug from the power supply to the Power 20V DC socket before connecting the
power supply to the mains.

Remote control

To switch on from standby or to standby

POWER turns the unit on or back into standby

Mute

MUTE activates and deactivates mute. If mute is engaged, the blue LED
above the ON/OFF switch will flash.

Selecting inputs in turns

CH- or CH+ select the inputs in turn

Direct access to inputs

1 - 9 access a specific input directly

Blanked out buttons do not carry a function.