Pro-Ject Audio Systems Receiver Box User Manual

Page 6

Technical specifications Pro-Ject Receiver Box

Power output:

2 x 20W/30W at 8ohms/4ohms (both channels driven)

Tuning range FM-band:

87,5 - 108,5MHz (

50kHz steps

)

Programmable presets:

THD tuner:

0,05% / ∆f 75kHz and f mod 1kHz

Stereo separation:

30dB / ∆f 75kHz and f mod 1kHz

Sensitivity: 7dB/µV mono, 17dB/µV stereo /75 ohms
Frequency response:

20Hz - 20kHz (±0,2dB)

Channel separation:

> 40dB at 20kHz

Noise floor:

> -100dB (A weighted)

THD amplifier:

< 0,05% at 10W

Gain: 22dB
Line-level inputs:

1 pair RCA/Phono sockets, 3-pole 3,5mm co-axial jack

Input impedance:

20kohms

Antenna input:

1 x co-axial DIN-socket (75 ohms) / US-model F-socket

Outboard power supply:

20V/3A DC (peak 7A DC), suitable for your country's mains supply

Power consumption:

20V/3A DC

Replacement battery remote control:

1 x CR2032 / 3V or 1 x CR2025 / 3V

Dimensions W x H x D (D with sockets): 103 x 36 x 103 (122)mm
Weight:

670g without power supply

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible

distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

PRO-JECT is a Registered Trademark of H. Lichtenegger.

The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing

process of technical development.