Pro-Ject Audio Systems Pre Box User Manual

Page 3

Remote control

ON/OFF

turns the unit on or back into standby.

The blue LED on the front panel shows that the unit is powered on.

VOL

and

VOL

adjust the sound volume

CH+

CH-

VOL+

VOL-

ON/OFF

and

select the inputs

Front panel controls

Pre Box

Power

Volume

Input

Select

Stand-By

The switch marked Power on the front turns the unit on or back into standby. The blue LED on the front panel

shows that the unit is powered on.

Input selector

Pressing the Input Select button selects the In 1 and In 2 inputs in turn. If Input 1 is selected, the LED over the
Input Select button lights up green. If Input 2 is selected, it lights up red.
If the optional input expander Pro-Ject Switch Box is connected, Input Select will also select the additional

inputs provided by the Switch Box. For further details please see the user guide of the Pro-Ject Switch Box.

Volume

Adjust the volume to the desired level using the large knob marked Volume on the front panel.