Pro-Ject Audio Systems Pre Box DS - Manual (Page 3)

© Audio Trade GmbH · Pro-Ject Pre Box DS · Revision 2013.1.15
3
Remote control
1
ON/OFF
short press turns the unit on, long press takes it back into standby.
Powered on, a short press activates and deactivates mute
0 _
VOL
and
0
+ VOL
adjust the sound volume
CH+
CH-
VOL+ VOL-
ON/OFF
0 _
CH
and
0
+ CH
select the inputs
Front panel controls
+ -
Pre Box DS
To switch on from standby or to standby
turns the unit on or back into standby (press and hold to switch into standby mode). The display shows
STANDBY when the unit is in standby.
While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next
power on.
Dimming the display
Press and hold the buttons and will change the display brightness - full, half and one third.
Input selector
Pressing the buttons and repeatedly selects the inputs 1 - 4 in turns. The selected input will be shown in the
display.
Volume
Adjust the volume (63 steps) to the desired level using the buttons and . The volume level will be shown in
the display. -63dB indicates min., 00dB max..
Mute
While the unit is powered on,
0
ON/OFF
activates and deactivates mute .