Pro-Ject Audio Systems Head Box RS User Manual

Page 3

Power switch

The rocker switch on the left side will turn the unit on or off. The blue LED above the switch shows that the unit is

switched on.

Connecting a headphone, volume control

Connect the headphones to the ¼“ (6,3mm



) jack socket on the front of the headphone amplifier. Use the

control knob to adjust the level to the required volume.

Output impedance selector

Output impedance of the amplifier can be chosen with OUT switch (5, 20, 50 Ohms).

Input selector

Switch on the right side of the amplifier selects active input socket on the rear panel, XLR or RCA.