Chicago Electric 68568 - Manual (Page 8)

Page 8 For technical questions, please call 1-800-444-3353. SKU 68568
Maintenance and Servicing
Procedures not specifically explained
in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Unlock and release the Trigger and disconnect
Battery Pack before performing any inspection,
maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal
noise or vibration occurs, have the problem
corrected before further use.
Cleaning, Maintenance,
and Lubrication
1. BEFORE EACH USE, inspect the general condition
of the tool. Check for loose hardware, misalignment
or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other
condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. When storing, always store in clean, dry and
safe location out of reach of children.
4. WARNING! If the supply cord of this power
tool’s charger is damaged, it must be replaced
only by a qualified service technician.
5. Dispose of Battery Pack properly. Do not
short, incinerate or open Charger or Battery
Pack. Keep Charger and Battery Pack dry.