ClearSounds CSC500 - Manual (Page 12)

12 – ENGLISH
█ Making a Call
Using the Handset
1. To make a call, lift the handset and listen for a dial tone.
You will see the In Use LED indicator light up.
2. You can dial a number manually or press one of the
memory dial keys once programmed.
3. Adjust your volume and tone settings if needed.
4. When finished, hang up the handset.
Using the Speakerphone
1. Press the Speaker key on the base and listen for a dial
tone. You will see the In Use LED indicator light up.
2. You can dial a number manually or press one of the
memory dial keys once programmed.
3. Adjust your volume by using the volume control V- or
V+ located on right side of the phone.
4. When finished, press the Speaker key to hang up.
5. To change back from speakerphone to handset use, simply
pick up the handset to disable the speakerphone.
6. To change back from handset to speakerphone, simply
press the Speaker key and then hang up the handset.