Cuisinart CPT-440 - Manual (Page 5)

5
To stop cycle
When the defrost cycle is complete, the toaster will raise the
bread. If you wish to stop the cycle before it is fi nished, simply
press the Cancel button to interrupt.
After use, unplug the toaster from the electrical outlet.
Reheat button
The reheat feature allows you to reheat bread without browning
or toasting.
1. Insert slice(s) of bread.
2. Press the Reheat button. Blue LED indicates feature is
activated.
3. Press the toast button to start.
To stop cycle
When the reheat cycle is complete, the toaster will raise the
bread. If you wish to stop the cycle before it is fi nished, simply
press the Cancel button to interrupt.
Bagel button
The bagel feature reduces heat on one side of the toasting slot.
This toasts the cut side of the bagel slightly more than the other side.
An embossed icon located on the top of the toaster,
just above the control panel, shows you the right way
to insert your bagel. (The cut side should always face
toward the center of the pair of toasting slots.)
1.
Insert slice(s) of bread or halved bagels
2. Press the Bagel button. Blue LED indicates feature is activated.
3. Press the toast button to start.
To stop cycle
When the bagel cycle is complete, the toaster will raise the bagel(s).
If you wish to stop the cycle before it is fi nished, simply press the
Cancel button to interrupt.
Fail-Safe
•
Should the unit sense that it is over-heating it is designed to
activate a “Fail-Safe” to ensure it can cool down quickly
and be able to return to a safe, usable state.
• When the Fail-Safe is activated all the LCD and LED lights
will come on and the unit will sound (3) one-second audible
tones. The LCD and LED lights will remain on until the unit is
unplugged and re-plugged into the outlet.
CLEANING AND MAINTENANCE
Always allow the toaster to cool completely before cleaning.
1. Always unplug the toaster from the electrical outlet before cleaning.
2. Do not use abrasive cleansers. Simply wipe the exterior with a clean
damp cloth and dry thoroughly. Apply any cleansing agent to a cloth,
not to the toaster, before cleaning.
3. To remove crumbs, slide out the crumb tray and discard crumbs.
Wipe clean and replace. Never operate the toaster without the
crumb tray in place.
4. To remove any pieces of bread remaining in the toaster, turn the
toaster upside down and gently shake. Never insert any hard or
sharp instruments into the slot, as this could damage the toaster
and cause a safety hazard.
5. Never wrap the cord around the outside of the toaster. Use the cord
storage cleats on the underside of the toaster.
6. Any other servicing should be performed by an authorized service
representative.