beautypg.com

Celestron Feathertouch SCT Microfocuser User Manual

Step 1

background image

Installation Instructions – Celestron 11” Telescopes

Important:

The telescope optical tube must be positioned horizontally before

removing the original focus assembly. If the telescope is not horizontal the primary
mirror could move during the installation.

Required Tools:

Phillips Screwdriver
1/16” Hex-Head Wrench (Not required for NexStar 11 GPS)





Step 1

Remove Focus Knob


NexStar 11 GPS telescopes have a rubber knob which can be pulled off. Older 11"
telescopes will have a metal focus knob which must be removed using a 1/16” hex-head
wrench to loosen a small set screw. Once the knob is removed you will see the brass
focus shaft as shown below.