CLIFFORD Sabre II User Manual

Page 16

How to erase the codes of lost or stolen remote controls
If one of your remote controls is ever lost or stolen, you can erase its digital codes
from the system memory to make sure that the missing remote control can never be
used to disarm your system. To do so, use the “Erase all channels” feature (see
User-selectable features on pages 13-14). This will clear all remote control codes
from the system memory. Then simply program each remaining and/or replacement
remote control as noted in the Adding new remote controls section on page 14.

Sabre II is covered by

one or more of the following Clifford Electronics patents:

4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;

5,157,375 and other patents

For a Clifford Dealer near you, call 1-800-CLIFFORD or visit our Internet Website at

http://www.clifford.com