Antenna system: srd-ant-1-pak, Introduction, Block diagram – Crestron electronic Antenna System SRD-ANT-1-PAK User Manual
Page 5: Crestron srd-ant-1-pak antenna system
Crestron SRD-ANT-1-PAK Antenna
System
Antenna System:
SRD-ANT-1-PAK
Introduction
The SRD-ANT-1-PAK is a high quality outdoor antenna system designed for use
with a single Crestron
®
XM or SIRIUS
®
satellite radio tuner. The antenna may be
positioned up to 200 feet (cable length) from the tuner using standard RG-6 cable
(not included).
The antenna features a considerably narrower beam width compared to standard
consumer antennas, achieving superior gain and multi-path rejection. Additional
front end filtering provides excellent rejection to nearby out-of-band RF signals from
sources such as Wi-Fi, cellular telephones, and cordless telephones.
A wall mount bracket with elevation and azimuth adjustments is provided for
installation of the antenna to any horizontal or vertical flat surface. The additional
U-bolt and bracket enable mounting to a pole (not included) up to two inches in
diameter. Connections between the antenna and tuner are achieved using industry
standard RG-6 cable and F-type connectors (not supplied). One F-to-SMB adapter
cable is included to adapt the RG-6 cable with F-connector to the SMB input
connector on the tuner.
Block Diagram
Installation Guide – DOC. 6721A
Antenna System: SRD-ANT-1-PAK
• 1