Dell S2409WFP Monitor - Manual (Page 8)

* S2409W Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%).
Resolution
Video Supported Modes
Preset Display Modes
Electrical
Pixel pitch 0.276 mm
Viewing angle 160° (vertical) typical, 170° (horizontal) typical
Luminance output 300 CD/m ²(typical)
Contrast ratio 1000 to 1 (typical)
Faceplate coating Antiglare with hard-coating 3H
Backlight CCFL edgelight system
Response Time 5 ms typical
Color Gamut 85%*
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 50 Hz to 76 Hz (automatic)
Optimal preset resolution 1920 x 1080 at 60 Hz
Highest preset resolution 1920 x 1080 at 60 Hz
Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP)
Video display capabilities (HDMI playback) 480i/480p/576i/576p/720p/1080i/1080p
Display Mode Horizontal
Frequency
(kHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/Vertical)
VGA, 720 x 400 31.5 70.1 28.3 -/+
VGA, 640 x 480 31.5 59.9 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1920 x 1080 67.2 60.0 173.0 -/+
VESA, 1920 x 1080 66.6 59.9 138.5 +/-
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Digital DVI-D TMDS, 600mV for each differential line, positive
polarity at 50 ohm input impedance
HDMI, 600mV for each differential line, 100 ohm input
impedance per differential pair
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current
120 V: 30 A (Max.)
240 V: 60 A (Max.)