Campbell Hausfeld CHN71600 - Manual

2
Attach air hose
to regulator outlet.
Adjust regulator
knob so outlet
pressure is between
60 psi and 100 psi.
1
Close pressure
regulator, Turn ON
compressor and
Allow tank to reach
maximum pressure.
Setup Like a Pro
CHN71600 — Air Powered Stapler
3/8 inch Stapler
CHN71600
Attach coupler on
airhose to nailer inlet.
4
Load fasteners. See manual for further information regarding
length and type of fasteners.
3
© 2010 Campbell Hausfeld/Scott Fetzer
IN730600AV 2/10
Setup Like a Pro
Easy Setup Guide
Projects are easier with
Campbell Hausfeld products.
Thank you for deciding to purchase a Campbell
Hausfeld product. We are dedicated to providing
tools that help you to complete your projects
Like a Pro
.
60
psi
100
psi
NOTICE: To operate this tool you will need
at least a 1 gallon compressor.
Press Press magazine latch button magazine latch button
and pull magazine open. and pull magazine open.
Close magazine. Load staples into the
magazine as shown.
Visit us at chpower.com