Attaching the cable cover, Removing the monitor stand – Dell P2715Q Monitor User Manual

Page 26

Text mode
Original mode

26 | Setting Up the Monitor

Attaching the Cable Cover

NOTE: The cable cover is detached when the monitor is shipped from the factory.

1 Insert the two tabs on the bottom part of the cable cover in the slots on the
back of the monitor.
2 Press the cable cover till it snaps into place.

Removing the Monitor Stand

CAUTION:

To prevent scratches on the LCD screen while removing the

stand,

make sure that the monitor is placed on a soft, clean surface.

NOTE: The procedure below is applicable for the default stand. If you
purchased any other stand, see the documentation shipped with the stand to
set it up.

To remove the stand:

1 Place the monitor on a soft cloth or cushion.
2 Press and hold the stand-release button.
3 Lift the stand up and away from the monitor.