CyberHome Entertainment CH-DVR 1500 - Manual (Page 29)

RECORDING
29
Use the UP/DOWN ARROW keys to select an entry and
press ENTER.
2
Use the UP/DOWN ARROW keys to select option
values, and the LEFT/RIGHT ARROW keys to move
among the fields.
3
Entry
01
Start
20:00
Length
1:00
Source
Ch 002
Speed
HP
Freq
08/15/05
Entry
01
Start
20:00
Length
1:00
Source
Ch 002
Speed
HP
Freq
08/15/05
Mon-Fri
Daily
Weekly Mon
Weekly Tue
....
To input numeric values such as START/STOP TIME and
SOURCE TV CHANNEL, use the NUMBER keys.
4
Length
21:00
Speed
HP
1 2 3
4 5 6
7 8 9
0 C C-SKIP
Source
Ch 036
3 6 0 + +
To save an entry, press ENTER. The recorder will return
to the Timer Schedule Screen and the new entry will be
shown in the list:
5
Entry
01
02
03
04
05
06
07
08
Freq
Weekly Mon
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
__/__/__
Start
20:00
__:__
__:__
__:__
__:__
__:__
__:__
__:__
Length
1:00
__:__
__:__
__:__
__:__
__:__
__:__
__:__
Source
Ch 036
______
______
______
______
______
______
______
Speed
HQ
__
__
__
__
__
__
__
To exit the Timer Menu, press TIMER. 6
!
For a scheduled Timer Recording to begin, the system must
be in STANDBY MODE. You cannot use the recorder for
another purpose, for instance to watch TV, and make a Timer
Recording at the same time. The only way a Timer Recording
can begin, is if the unit is powered down, with the front
Standby light ON.
When you schedule a Timer Recording, you will see the
message “SWITCH OFF FOR TIMER RECORDING” appear on
screen, reminding you to switch the unit to Standby Mode
before the recording is set to begin. This message will also
appear on screen 5 MINUTES before a Timer Recording is set
to begin. At this point, you must switch the unit to Standby
Mode to allow the recording to begin.
Timer Recording Messages
SWITCH OFF FOR TIMER RECORDING
This message is letting you know that at least 2 entries have
conflicting schedules, where the recording periods overlap.
In this case, the Timer Recording that begins first will take
precedence, cancelling any entries that occur within it’s
recording period.
SCHEDULING OVERLAPPED!