Dell P2415Q Monitor User Manual
Page 34
34 | Operating the Monitor
Icon
Menu and
Submenus
Description
Aspect Ratio
Adjust the image ratio to Wide 16:9, 4:3, or 1:1.
Sharpness
Makes the image look sharper or softer.
Use
or
to adjust the sharpness from ‘0’ to ‘100’.
Dynamic
Contrast
Allows you to increase the level of contrast to provide sharper
and more detailed image quality.
Push the
button to select the Dynamic Contrast “On”
or “Off”.
NOTE: Dynamic Contrast provides higher contrast if you
select Game or Movie preset mode.
Response
Time
Allows you to set the Response Time to Normal or Fast.
Uniformity
Compensation
Select screen brightness and color uniformity compensation
settings. Calibrated is factory calibrated setting by default.
Uniformity Compensation adjusts different areas of the screen
with respect to the center to achieve uniform brightness and
color over the entire screen. For optimal screen performance,
Brightness and Contrast for some preset modes (Standard...)
will be disabled when Uniformity Compensation is turned On.
MST
“Off”: Default mode - 4k2k 60Hz with MST function Disabled.
“Primary”: Set as primary mode at 4K2K 30Hz with MST (DP
out) enabled.
“Secondary”: Set as secondary mode at 4K2K 30Hz with MST
(DP out) disabled.
NOTE: Secondary mode can be set using hot key to switch to
DP 1.1 when there is no display. See
Reset Display
Settings
Restores the display settings to factory defaults.
Energy
Power
Button LED
Allows you to set the state of the power light to save energy.