Dell S510 Interactive Projector User Manual
Page 5
Write
OSD Transparency
Read
0xefbe 0x10
0x0005 0x7fec
0x1111
0x0001 0x67
Range (0x00~0x0f)
Volume Write
0xefbe 0x10
0x0006 0xdb18
0x1111
0x0002 0x68
0x00~0x14 Range (0x00~0x14)
Source-VGA
Analog-B
0xefbe 0x10
0x0005 0xfe28
0x1111
0x0001 0x69
Temp Alert
0xefbe 0x10
0x0005 0xbe29
0x1111
0x0001 0x6a
0x00: Normal
0x01: Abnormal
Exit Lockup
0xefbe 0x10
0x0005 0xffeb
0x1111
0x0001 0x6d
Closed Captions
0xefbe 0x10
0x0006 0x7e2a
0x1111
0x0002 0x6f
0x00~0x04
0x00: Off
0x01: CC1
0x02: CC2
0x03: CC3
0x04: CC4
Lamp Mode
Dynamic
0xefbe 0x10
0x0005 0x3fe2
0x1111
0x0001 0x70
Lamp Mode
Extreme Dimming
0xefbe 0x10
0x0005 0xfe22
0x1111
0x0001 0x71
Source-HDMI2
0xefbe 0x10
0x0005 0xbe23
0x1111
0x0001 0x72
Power Saving
0xefbe 0x10
0x0006 0xfe66
0x1111
0x0002 0x81
0x00~0x78
0x00, 0x05, 0x0a, 0x0f,
0x14, 0x19, 0x1e, 0x23,
0x28, 0x2d, 0x32, 0x37,
0x3c, 0x41, 0x46, 0x4b,
0x50, 0x55, 0x5a, 0x5f,
0x64, 0x69, 0x6e, 0x73,
0x78
Quick Shutdown
0xefbe 0x10
0x0006 0xbe67
0x1111
0x0002 0x82
0x00~0x01
0x00: No
0x01: Yes
Lamp-Mode Read
0xefbe 0x10
0x0005 0x7fa7
0x1111
0x0001 0x83
0x00: Eco
0x01: Normal
0x02: Dynamic
0x03: Extreme Dimming
Operating Hours
0xefbe 0x10
0x0005 0x3e65
0x1111
0x0001 0x84
Hours (2 byte)
Password Off
0xefbe 0x10
0x0005 0xffa5
0x1111
0x0001 0x85
Password Delete
0xefbe 0x10
0x0005 0xbfa4
0x1111
0x0001 0x86
Zoom Status
0xefbe 0x10
0x0005 0xffa0
0x1111
0x0001 0x89
Range (0x01~0x0a)
Power Saving Status 0xefbe 0x10
0x0005 0xbfa1
0x1111
0x0001 0x8a
0x00, 0x05, 0x0a, 0x0f,
0x14, 0x19, 0x1e, 0x23,
0x28, 0x2d, 0x32, 0x37,
0x3c, 0x41, 0x46, 0x4b,
0x50, 0x55, 0x5a, 0x5f,
0x64, 0x69, 0x6e, 0x73,
0x78
Source-Wireless
Display
0xefbe 0x10
0x0005 0x7e61
0x1111
0x0001 0x8b
Wireless Off
0xefbe 0x10
0x0005 0x3fa3
0x1111
0x0001 0x8c
Wireless On
0xefbe 0x10
0x0005 0xfe63
0x1111
0x0001 0x8d
Source-USB Display 0xefbe 0x10
0x0005 0xbe62
0x1111
0x0001 0x8e
Source-USB Viewer 0xefbe 0x10
0x0005 0x7fa2
0x1111
0x0001 0x8f
Source-
Intel®
WiDi
0xefbe 0x10
0x0005 0x3fac
0x1111
0x0001 0x98
Source-Internal
Memory
0xefbe 0x10
0x0005 0xfe6c
0x1111
0x0001 0x99
System Status
0xefbe 0x10
0x0005 0x7e46
0x1111
0x0001 0xff
0x01: Standby
0x02: Warm Up
0x03: Power On
0x04: Cooling
0x05: Power Saving
Note 2: After power on the projector, wait for 5 seconds before sending next command.
Note 3: The range will depend on VGA input resolution.
Note 4: If sending multiple commands, check that a response has been received from the projector
before sending next command.
Information in this document is subject to change without notice.
© 2014 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks
and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its
own.
December 2014 Rev. A00