Dell P2310H Monitor - Manual (Page 24)

See Solving Problems for more information.
Setting the Maximum Resolution
To set the Maximum resolution for the monitor:
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1920 x 1080.
4. Click OK.
If you do not see 1920 x 1080 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures:
l If you have a Dell desktop or portable computer:
¡ Go to support.dell.com , enter your service tag, and download the latest driver for your graphics card.
l If you are using a non-Dell computer (portable or desktop):
¡ Go to the support site for your computer and download the latest graphic drivers.
¡ Go to your graphics card website and download the latest graphic drivers.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See
Monitor Specifications for the
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920x1080.
You will see the following message before the DDC/CI function is disabled.
When monitor enters Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD .
If you press any button other than the power button one of the following messages will appear depending on the selected input:
VGA/DVI-D/DP input
If either VGA or DVI-D or DP input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.
or or