Dell IN1930 Monitor - Manual (Page 7)

Plug and Play Capability
You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the
system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock-
Flat Panel Specifications
* Based on estimation.
** [IN1930/IN2030M] color gamut (typical) is based on CIE1976 (82 %) and CIE1931 (72 %) test standards.
Resolution Specifications
Electrical Specifications
Model number Dell IN1930 monitor Dell IN2030M monitor
Screen type Active matrix - TFT LCD Active matrix - TFT LCD
Panel Type TN TN
Screen dimensions
47.0 cm (18.5 inches) (18.5-inch wide
viewable image size) 50.8 cm (20 inches) (20-inch wide
viewable image size)
Preset display area:
l Horizontal
l Vertical
409.8 mm (16.14 inches)
230.4 mm (9.07 inches)
442.8 mm (17.43 inches)
249.1 mm (9.81 inches)
Pixel pitch 0.300 mm 0.277 mm
Viewing angle:
l Horizontal
l Vertical
170 ° typical
160 ° typical
170 ° typical
160 ° typical
Luminance output 250 cd/m² (typical) 250 cd/m² (typical)
Contrast ratio 1000 to 1 (typical) 1000 to 1 (typical)
Dynamic Contrast Ratio 8,000,000 to 1 (typical) * 8,000,000 to 1 (typical) *
Faceplate coating Antiglare with hard-coating 3H Antiglare with hard-coating 3H
Backlight LED light bar system LED light bar system
Response Time 5 ms typical (black to white) 5 ms typical (black to white)
Color Depth 16.7 mil colors 16.7 mil colors
Color Gamut 82 % (typical) ** 82 % (typical) **
Model number Dell IN1930 monitor Dell IN2030M monitor
Scan range
l Horizontal
l Vertical
30 kHz to 83 kHz (automatic)
56 Hz to 75 Hz (automatic)
30 kHz to 83 kHz (automatic)
56 Hz to 75 Hz (automatic)
Maximum preset resolution 1366 x 768 at 60 Hz 1600 x 900 at 60 Hz
Model number Dell IN1930/IN2030M monitor
Video input signals
Analog RGB: 0.7 Volts +/- 5 %, 75 ohm input
impedance
Synchronization input signals
Separate horizontal and vertical
synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage / frequency / current
100 VAC to 240 VAC/50 Hz or 60 Hz + 3 Hz/1.5 A
(Max.)