Dell S2715H Monitor - Manual (Page 34)

34 | Operating the Monitor
Icon
Menu and
Submenus
Description
Display Use the Display menu to adjust image.
Aspect Ratio Adjust the image ratio to Wide 16:9, 4:3, or 5:4.
Horizontal
Position
Use or to adjust the image left or right.
Minimum is ‘0’ (-).
Maximum is ‘100’ (+).
Vertical
Position
Use or to adjust the image up or down.
Minimum is ‘0’ (-).
Maximum is ‘100’ (+).
NOTE: Horizontal Position and Vertical Position adjustments
are only available for “VGA” input.
Sharpness Makes the image look sharper or softer.
Use
or to adjust the sharpness from ‘0’ to ‘100’.
Pixel Clock The Phase and Pixel Clock adjustments allow you to adjust
your monitor to your preference.
Use the
or buttons to adjust for best image quality.
Phase If satisfactory results are not obtained using the Phase
adjustment, use the Pixel Clock (coarse) adjustment and then
use Phase (fine) again.
NOTE: Pixel Clock and Phase Adjustments are only available
when your monitor is connected using the VGA cable.
Dynamic
Contrast
Allows you to increase the level of contrast to provide sharper
and more detailed image quality.
Push the
button to select the Dynamic Contrast “On”
or “Off”.
NOTE: Dynamic Contrast provides higher contrast if you
select Game or Movie preset mode.
Response
Time
Allows you to set the Response Time to Normal or Fast.