Dell P2214H Monitor - Manual (Page 24)

Attaching the Cable Cover
The Cable Cover is detached when the monitor is shipped from the factory.
1. Fit the two tabs on the bottom part of the Cable Cover to the groove on the back of
the monitor.
2. Press the Cable Cover till it snaps into place.
Removing the Monitor Stand
NOTE: To prevent scratches on the LCD screen while removing the stand, ensure
that the monitor is placed on a soft, clean surface.
NOTE: This is applicable for a monitor with a stand. When any other stand is
bought, please refer to the respective stand setup guide for the set-up instructions.
.To remove the stand:
1. Place the monitor on a soft cloth or cushion.
2. Press and hold the stand release button.
3. Lift the stand up and away from the monitor
24 | Setting Up the Monitor