Dell E1709WFP Monitor - Manual (Page 27)

Back to Contents Page
Specific Symptoms What You Experience Possible Solutions
Screen image is too small Image is centered on screen,
but does not fill entire viewing
area l Reset the monitor to Factory Settings.
Cannot adjust the monitor with
the buttons on the front panel OSD does not appear on the
screen l Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.
No Input Signal when user
controls are pressed No picture, the LED light is
blue. When press "up", "down"
or "Menu" key, the message "
No input signal " will appear. l Check the signal source. Ensure the Computer is not in the power saving mode by
moving the mouse or pressing any key on the keyboard.
l Check whether the signal cable is plugged in properly. Re -plug the signal cable if
necessary.
l Reset the computer or video player.
The picture does not fill the
entire screen. The picture cannot fill the
height or width of the screen l Due to different video formats (aspect ratio) of DVDs, the monitor may display in full
screen.
l Run the built-in diagnostics.