beautypg.com

Storing the tire sealant and compressor kit, Jump starting, Jump starting -31 – Cadillac 2011 Escalade Hybrid User Manual

Page 75: Storing the tire sealant and, Compressor kit -31

background image

Black plate (31,1)

Cadillac Escalade Hybrid - 2011

Vehicle Care

10-31

Storing the Tire Sealant
and Compressor Kit

The tire sealant and compressor kit
is located under the storage tray on
the driver side trim panel (over the
rear wheelhouse).

To access the tire sealant and
compressor kit:

1. Remove the tray by pulling up

on the finger depression to
access the tire sealant and
compressor kit .

2. Locate the tire sealant and

compressor kit .

3. Remove the sealant and

compressor kit by pulling the
velcro strip up and back.

4. Remove the sealant and

compressor kit from its plastic
tray assembly.

To store the tire sealant and
compressor kit, reverse the steps.

Jump Starting

{

WARNING

Personal injury, death, or damage
to the vehicle can result if you try
jump starting or using a battery
charger on the high voltage
hybrid battery. Use only the
12-volt battery for jump starting
and charging.

For more information about the
vehicle battery, see Battery on
page 10‑13
.