Craftsman D25852 - Manual (Page 7)

7- ENG D25852
HOW TO PREVENT IT WHAT CAN HAPPEN
HAZARD
RISK OF HOT SURFACES
• Contact with hot surfaces, such as
engines exhaust components, could
result in serious burn.
• During operation, touch only the control
surfaces of the pressure washer. Keep
children away from the pressure washer
at all times. They may not be able to
recognize the hazards of this product.
HOW TO PREVENT IT WHAT CAN HAPPEN
HAZARD
• Fuel or oil can leak or spill and could
result in fire or breathing hazard, serious
injury or death can result. Fuel or oil
leaks will damage carpet, paint or other
surfaces in vehicles or trailers.
• If pressure washer is equipped with a
fuel shut-off valve, turn the valve to the
off position before transporting to avoid
fuel leaks. If pressure washer is not
equipped with a fuel shut-off valve, drain
the fuel from tank before transporting.
Only transport fuel in an OSHA approved
container. Always place pressure washer
on a protective mat when transporting to
protect against damage to vehicle from
leaks. Remove pressure washer from
vehicle immediately upon arrival at your
destination.
RISK OF INJURY AND PROPERTY
DAMAGE WHEN TRANSPORTING
OR STORING
The powerful spray from your pressure washer is capable of
causing damage to surfaces such as wood, glass, automobile paint,
auto striping and trim, and delicate objects such as flowers and shrubs. Before
spraying, check the item to be cleaned to assure yourself that it is strong enough to
resist damage from the force of the spray. Avoid the use of the concentrated spray
stream except for very strong surfaces like concrete and steel.
Operating without flow of water will result in equipment damage. Operating the
pressure washer with water supply shutoff will void your warranty. You should never
run this pressure washer for more than 2 minutes without pulling the trigger to allow
cool water to enter the pump and the heated (recirculated) water to exit.