Cavalry Storage CADA-C32A User Manual
Page 13
12
RAID
Your product has been preconfigured as RAID 1 (mirrored). "Mirrored"
means that each of the two disks in your disk array contains the same data,
providing protection against one drive failing; however, when the drive
appears on your computer, it will be recognized as a single hard drive.
NOTE:
Although the box indicates two hard drives are included, the total
capacity in RAID 1 mode will not equal the sum of the two because the
second drive is used as a "backup" of the first drive. (e.g. two 250GB drives
do not have a 500GB capacity. Instead, only 250GB is available for storage,
while the other 250GB is a backup of that data.)
Please contact us at [email protected] if you would like
to reconfigure the RAID settings on your drive.
13