Cobra Electronics CPI 450 - Manual (Page 6)

7 Nothing comes close to a Cobra ® 6 English
Connecting Cables
Mounting
•
To mount your inverter:
1. Place the inverter on a flat surface with the mounting
bracket against the mounting surface.
2. Mount to secure surface using mounting hardware
that is corrosion resistant (not included).
The inverter can be mounted horizontally or vertically.
Connecting Cables
•
Power wire and wiring are very important to the
performance of the inverter. Because the inverter has a
low voltage, high current input, low resistance wiring is
essential between the battery and inverter. This is so it
can deliver the maximum amount of energy to the load.
Only use the cables provided with your power inverter.
To connect the cables between
the inverter and the battery:
1. Turn the On/Off Switch on the
inverter to the off position. If the
power source is a DC power
Installation
Mounting and
Connecting Cables
Installation
Mounting Brackets
Mounting Hardware
supply, switch it off as well.
Connect Terminals
Connect Power Source
On/Off Switch to Off