Crown Equipment Pneumatic Tire Lift Trucks MDX50 - Manual (Page 3)

GENERAL D70-8 G70-8 D80-8
1 Power Type Diesel Gasoline Diesel
2 Operation Type Sit-Down Sit-Down Sit-Down
3 Rated Capacity*
(Capacity 600 mm 24 inch Load center)
lbs. (kg) 15,400 (7000) 15,400 (7000) 18,000 (8000)
4 Load Distance (From Center of Front Axle) in. (mm) 23.0 (585) 23.0 (585) 26.6 (675)
5 Wheelbase in. (mm) 90.5 (2300) 90.5 (2300) 98.4 (2500)
WEIGHT
6 Service Weight lbs. (kg) 20,380 (9245) 19,950 (9050) 24,240 (10995)
7 Axle Loading
Loaded Front lbs. (kg) 31,590 (14330) 31,490 (14289) 37,520 (17020)
Rear lbs. (kg) 4,220 (1915) 3,890 (1765) 4,350 (1975)
Unloaded Front lbs. (kg) 8,210 (3725) 8,110 (3680) 10,680 (4845)
Rear lbs. (kg) 11,510 (5220) 11,840 (5370) 13,560 (6150)
TIRE
8 Tire Type Pneumatic Pneumatic Pneumatic
9 Tire Size Front 8.25-15-14PR (I) 8.25-15-14PR (I) 9.00-20-12PR (I)
Rear 8.25-15-14PR (I) 8.25-15-14PR (I) 9.00-20-12PR (I)
10 Number of Wheel - Front/Rear (x=driven) 4x/2 4x/2 4x/2
11 Tread,
(center of tires)
Front in. (mm) 57.1 (1450) 57.1 (1450) 60.6 (1540)
Rear in. (mm) 64.6 (1640) 64.6 (1640) 66.9 (1700)
DIMENSIONS
12 Tilting Angle (Forward/Backward) degree 6/12 6/12 6/12
13 Mast Height, Lowered with Std. Mast in. (mm) 101.8 (2585) 101.8 (2585) 106.7(2710)
14 Std. Free Lift with Std. Mast from Ground in. (mm) 8.7 (220) 8.7 (220) 8.7 (220)
15 Max. Fork Height** in. (mm) 118 (3000) 118 (3000) 118 (3000)
16 Mast Height, Extended with Std. Mast in. (mm) 171.2 (4350) 171.2 (4350) 171.2 (4350)
17 Height, Overhead Guard in. (mm) 96.1 (2440) 96.1 (2440) 102.7 (2610)
18 Length, to fork face in. (mm) 140.3 (3565) 140.3 (3565) 152.5 (3875)
19 Width, at tire in. (mm) 77.2 (1960) 77.2 (1960) 83.5 (2120)
20 Forks (Thickness x Width x Length) in. (mm) 2.5 x 5.9 x 48.0
(65 x 150 x 1220)
2.5 x 5.9 x 48.0
(65 x 150 x 1220)
2.5 x 6.7 x 48.0
(65 x 170 x 1220)
21 Width, Fork Carriage (Max./Min.) in. (mm) 66.9/11.8 (1700/300) 66.9/11.8 (1700/300) 70.9/13.4 (1800/340)
22 Ground
Clearance
Under the Mast in. (mm) 8.8 (225) 8.8 (225) 9.8 (250)
at the center of wheelbase in. (mm) 11.2 (285) 11.2 (285) 13.2 (335)
23 Right Angle Stacking Aisle † in. (mm) 210.8 (5355) 210.8 (5355) 224.2 (5695)
24 Turning Radius in. (mm) 131.9 (3350) 131.9 (3350) 141.7 (3600)
PERFORMANCE
25 Travel Speed
(FWD)
Loaded, 1st/2nd mph (km/h) 6.8 (11.0)/18.6 (30.0) 6.8 (11.0)/17.4 (28.0) 7.5 (12.0)/19.3 (31.0)
Unloaded, 1st/2nd mph (km/h) 7.5 (12.0)/19.9 (32.0) 7.5 (12.0)/19.9 (32.0) 7.8 (12.5)/20.5 (33.0)
26 Lifting Speed (Loaded/Unloaded) fpm (mm/s) 89/98 (450/500) 72/77 (365/390) 90/98 (455/500)
27 Lowering Speed (Loaded/Unloaded) fpm (mm/s) 108/98 (550/500) 108/108 (550/550) 98/89 (500/450)
28 Max. Drawbar Pull (Loaded 1.5km/h, 3min rating) lbs. (kN) 10,350 (46.1) 9,470 (42.1) 12,950 (57.6)
29 Max. Gradeability (Loaded 1.5km/h, 3min rating) % 29.8 24.2 32.7
30 Service Brake Hydraulic, Powered Hydraulic, Powered Hydraulic, Powered
31 Parking Brake Mechanical Mechanical Mechanical
32 Steering Power Steering Power Steering Power Steering
DRIVE
33 Make/Model KOMATSU S6D102E NISSAN TB45E KOMATSU SA6D102E
34 Rated Output/Speed, SAE gross HP (kW) @rpm 103 (77)@2250 95 (70)@2400 129 (96)@2250
35 Max.Torque/Speed, SAE gross lb. - ft. (N-m) @ min-1 289 (392)@1000 203 (276)@1600 344 (466)@1600
36 Number of Cylinder/Displacement cu.in (cm 3 ) 6/359 (5880) 6/273 (4478) 6/359 (5880)
OTHER
37 Fuel Tank Capacity US gal (Ltr) 37 (140) 37 (140) 37 (140)
38 Relief Pressure for Attachment psi (bar) 2,630 (181) 2,630 (181) 2,630 (181)
39 Hydraulic Tank Capacity US gal (Ltr) 18 (70) 18 (70) 18 (70)
40 Clutch Torque Converter Torque Converter Torque Converter
41 Transmission TORQFLOW TORQFLOW TORQFLOW
42 Battery (Voltage/Capacity at 5-hour rating) V/Ah 24/52 12/48 24/52
MDX50 PNEUMATIC TIRE LIFT TRUCK SPECIFICATIONS
NOTE: Most values shown in this publication are rounded. Therefore, direct conversion between metric and English or Imperial may be slightly different from those
shown. The performance of machines is affected by the condition of the truck and how it is equipped, as well as the nature and condition of the operating area.
If these specifi cations are critical or if your needs exceed the specifi cations shown here, discuss the proposed application with your authorized dealer.
*Optional masts, attachments, longer load dimensions, and higher lifting heights may result in downrating of the capacity. Contact your authorized dealer.
**Other mast heights available. See MAST DATA chart for other standard mast heights. Contact your authorized dealer.
†Add load distance and clearance. Contact your authorized dealer.