Craftsman 247.77635 - Manual (Page 7)

7
Attaching The Debris Collection Bag
• To attach the bag, place the opening of the bag
completely over the discharge chute.
• Position the bag so that the wing knobs which
secure the discharge chute to the housing are
completely covered.
• Pull on the drawstrap until the bag is tight around
discharge chute. See Figure 4.
Figure 4
Emptying the Debris Collection Bag
• Squeeze the locking buckle to release the bag’s
drawstrap before loosening it from the discharge
chute. See Figure 5
• Empty the bag and reattach to the discharge chute
opening. Refer to Figure 4.
Figure 5
Debris Collection Bag
Housing
Locking Buckle