Turning the camera on and off, Setting the date, time and date stamp – Concord Camera 3043 User Manual

Page 11

GETTING STARTED

To remove the SD card:

Press the memory card into the slot then release. When the card is partially ejected, pull it out.

Note:If the “Memory Full! ” warning message appears on the LCD, it means the SD card or

internal memory is full. Please remove the memory card and insert a new one or transfer all

images to your computer.

TURNING THE CAMERA ON AND OFF

Press the Power button to turn the camera on. The green Power lamp will light up, the LCD will turn

on automatically.

After one minute of inactivity, the LCD will automatically power off. Then the camera will automatically

power off after being idled for around 3 minutes by default. To power off the camera sooner, press the

Power button.

SETTING TIME AND DATE STAMP

When you first use your camera or when the batteries are removed for an extended time

(approximately 120 minutes), you will need to set the Date and Time . The date and time information

will be displayed on the picture if date stamp is turned on.

1. Slide the Function switch to

(Capture mode).

2. Press the MENU button.

3. Press the

button to select Ad (Advance), and

then press the Enter button to enter its sub-menu.

4. Press the

button to select Date Time, and

then press the Enter button.

5. Press the

button to highlight the field to be

changed, and then press the

button to set the

value.

6. Press the

button to highlight Date stamp, then

press the Enter button to turn the function on.

7. When the setting is completed, press the MENU button to return to capture mode.