Curtis MPK2050 - Manual (Page 6)

- 6 -
7. Listen to WMA/MP3 music with the MP3 Player
1) Copy WMA/MP3 music files to the MP3 Player (please take the reference of
"Transferring data to and from the MP3 Player").
2) Connect with supplied headphones.
3) Press the Power On button to turn on the player.
4) Press the Play button to play the music.
5) Use the MP3 Player controls to play back and adjust volume level to listen to
the WMA/MP3 music.
7.1 A-B Repeat function
• If you want to listen to one section of the music
repeatedly, you can use A-B repeat function.
• In playing mode, press and hold the A-B button to
set the starting point (point A) of the music and
press and hold the A-B button again to set the
ending point (point B). The A-B section will be
played repeatedly on the player.
• Press and hold A-B button again to cancel the
repeat.
7.2 Lyric display function
The MP3 Player supports lyric files in LRC format.
1) Prepare the MP3 or WMA music as you like, for example, happymusic.mp3;
2) Download a lyric file from internet. The lyric file must have an extension file
name LRC. For example, happymusic-2004.lrc.
3) Rename the lyric file. For example, happymusic.lrc. It is to make sure the
lyric filename is the same as the corresponding music filename.
4) Copy the lyric file & music file to the MP3 player.
5) Disconnect the MP3 player from your computer.
6) Use Skip buttons to select the music file which has the related lyric files, for
example, happymusic.mp3. Press Play button to play.
7) Then the music is played and lyric is displayed synchronously on screen.
Note:
9
The interval between point A and point B must be more than 3 seconds.