Clarion TB851P - Manual (Page 12)

14
TB851P/TB853W
280-8212-00
English
● Viewing video images
1. Press the [SRC] button to select VISUAL1 or
VISUAL2.
The setting shifts in the sequence shown
below, each time the [SRC] button is
pressed.
TV ➔ VTR1 ➔ VTR2 ➔ VISUAL1 ➔
VISUAL2 ➔ TV ➔ ...
Video from the external device connected to
the video in terminal (visual input 1 or visual
input 2) appears on the screen.
Notes:
• See the instruction manual of the external device
to be connected to find out how to operate that
external device.
• Video from external devices connected to visual
input 1 or visual input 2 can be viewed on a rear
monitor sold separately. To view on that rear
monitor, connect the rear monitor to the VIDEO
OUT (video output) terminal on this unit.
Viewing CCD camera images
Connect the CCD camera to this unit correctly
When the CCD camera is correctly connected to
this unit and set, the following functions are
activated.
• Automatically displays CCD camera images
when the gear is set in reverse.
Note:
• Connect the reverse gear signal wire from the
power supply box of the CCD camera to the
positive (+) backlamp wire.
• A caution message appears during display of
the camera images.
See “Setting the caution message for use
during CCD camera operation”. (See page
18.)
Operating with an external device
*TB851P/TB853W(09-20)E 05.2.25, 11:26 AM 14