Connect Tech CTIM-00060 - Manual (Page 12)

Connect Tech Inc. | FreeForm/Express S6 - PCIe Spartan-6 FMC Carrier | User Manual
Revision 0.01 12
Configuration
The FreeForm/Express S6 is designed so that the Spartan-6 configuration image is automatically loaded
from the on-board SPI flash at power- up. When a valid configuration is loaded, led D4 is illuminated.
JTAG configuration can be used at any time to program the FPGA.
The FreeForm/Express S6 is fitted with a x4 32 Mbit SPI flash (Winbond W25Q32BVSFIG), which can be
programmed indirectly via JTAG using Xilinx’s IMPACT.
Function JTAG programming
Location P5
Type
1x7 0.100” header
Samtec TSW-107-08-F-S-RA
Pinout
Pin Signal Description
1 TRST# Reset, not used by Xilinx
products
2 TMS Select
3 TDI Data In
4 TDO Data Out
5 TCK Clock
6 GND Digital Ground
7 VCC Chain power, 3.3V
Function Manual Reset
Pulls the Spartan-6 PROG_B pin to ground, resetting and
reconfiguring the FPGA
Location J1
Type
1x2 0.100” jumper block
Pinout
Position Description
1-2 +5V
off floating
Default Floating