Crown Equipment Cushion Tire Lift Trucks MCX20 - Manual (Page 7)

TECHNICAL DATA
MAST, CARRIAGE, LBR AND FORKS
High-visibility mast assembly with 6-roller
carriage available in 2-Stage Free-View and
2-Stage or 3-Stage Full Free-View type.
• Sealed bearings for reduced maintenance
with standard side thrust rollers on carriage.
• Equipped with ITA Class III carriage bars
for mounting forks or a variety off load
handling attachments.
• 48-inch load backrest is standard.
• Single and double function internal hosing
is available for operating attachments.
OPERATOR COMPARTMENT
A unique full-fl oating Suspension Compart-
ment (SC) designed to isolate the operator
from fatigue producing vibration.
• Comft seat with built-in lumbar support,
retractable seat belt, lateral restraint
system, and adjustable 6” (150mm) of
seat travel is standard.
• Hydraulic control levers have easy-to-read
international symbols on the contoured
grips and are within easy reach of
the operator.
• Tilting steering console, with infi nite
adjustment through tilt range positions
instrument panel in full view of operator
at all times.
• Floor mounted automotive-type pedals
with large ribbed pads for comfort and
safe operation. Accelerator pedal is
mounted on a Tefl on roller mechanism
to reduce operator effort.
• Full width fl oor mat provides large non-slip
surface, reduces noise, vibration, and heat.
• Large open steps and convenient assist
handgrip provides easy entry and exit for
the operator.
• Separate inching and braking pedals
provide positive control while reducing
wear on the drive train.
• Trucks come standard with an integral
headlight/turn indicator control. Turn
indicator has automatic return to neutral.
• The 3-piece overhead guard is full width
and offers excellent visibility for stacking
high loads.
SERVICEABILITY
Excellent access to engine compartment,
transmission, and radiator areas can be
achieved without tools. Making daily checks
and maintenance easier.
• The gas cylinder-assisted, one-piece all
metal engine compartment cover lifts
easily and is insulated to reduce noise
and heat.
• Cover also features a single latch for
locking down and an open cover catch to
prevent cover from coming down while in
open position.
• Bottom corner of cover is angled to allow
more access into engine compartment for
scheduled maintenance and service.
COMPLIANCE, APPROVALS AND
ENVIRONMENTAL CONCERNS
Meets or exceeds American National Stan-
dards Institute, ASME B56.1 – Part III Safety
Standards for Powered Industrial Trucks.
Compliant with UL 558 for the appropriate
truck type. Contact your authorized dealer
for application specifi cs. Meets or Exceeds
EPA emissions standards.