Conair CTS 7 - Manual (Page 31)

UGE058/0803 CTS Saw
O
PERATION
4-3
Adjust the TABLE RETURN speed control to the
suitable travel return speed.
Adjust the clamp pressure regulator to grasp the pro-
file firmly.
T
HE
C
ONTROL
F
EATURES
CONTINUED
13
14
NOTE: The TABLE RETURN pressure must be set high
enough to return the table to the start position and trig-
ger the TABLE START micro-switch.
NOTE: Both the clamp pads and pressure can be
adjusted so that the profile is not crushed.