Cobra Electronics 29 NW - Manual (Page 2)

Installation Installation
Location
3 2
Mounting and
Connection Mounting and Connection
Hold the radio with the mounting bracket in
the exact desired location. If there is no
interference, remove the bracket and use it as
a template to mark the location for the
mounting screws.
Location
Plan location of transceiver and microphone
bracket before starting the installation.
Select a location that is convenient for operation,
yet does not interfere with the driver or passenger.
The transceiver is usually mounted to the
underside of the dash with the microphone
bracket beside it.
Note
The transceiver is held in the
universal mounting bracket
by two thumbscrews which
allow for adjustment at a
convenient angle.
The bracket includes two
self-tapping screws and star
washers. The mounting
must be mechanically strong,
conveniently located.
continued
Drill the holes and secure the bracket. 2
1
Connect the antenna cable plug to the
receptacle marked “ANT” on the back
of the unit. 3
ANT
PA.SP. EXT.SP.
+ POWER –
DATE OF
MFG :JUNE 98 FCC ID:BBO3K229LTD COBRA
MADE IN CHINA
SERIAL NO.:806135776
PRECISION ENGINEERED PRODUCT OF
COBRA ELECTRONICS CORP. CHICAGO, ILL.60707