Assembly – Coleman 5076 User Manual

Page 4

3 Required

Large Screw

View from inside

looking upward.

Assembly

cont.

■ Place collar ring in position as
shown.

Step 3

■ Load fire pan assembly.

■ Install 3 Phillips Head screws
through support ring in location
shown. Tighten screws.

Step 1

(cont)

■ Install two cover pieces to base.

5 Required

■ Unit is now ready for final
assembly.

Large Screw

■ Install log center piece.

■ Logs are marked A, B, C, D, E, which match markings on log support
ring.

■ Install log support ring so that
“A” is to the front of the unit
(Control Panel side).

Step 4

■ Notches in Support Ring must
match Electrodes on Burner.

Notches

Electrodes

Burner

NOTE: Make sure no wires are
pinched between fire pan and
support ring.

Fire Pan

Support
Ring

Step 2

■ Install top support ring between
cover and support brackets.

3 Required

Large Screw