CLIFFORD 700-IQ User Manual

Page 25

Table of user-selectable features: 1 chirp = OFF, two chirps = ON.

Feature Select

Column 1

1st latched

Column 2

2nd latched

Column 3

3rd latched

Column 4

4th latched

Row 1

1st momentary

Sound 1: on/off
info on page 18

Add new remote to channel 1

info on page 10 NOTE 1

AutoLock on/off

info on page 16

AutoArming: on/off

info on page 12

Row 2

2nd momentary

Sound 2: on/off
info on page 18

Add new remote to channel 2

info on page 10 NOTE 2

AutoUnLock on/off

info on page 16

AutoArm & Lock: on/off

info on page 12

Row 3

3rd momentary

Sound 3: on/off
info on page 18

Add new remote to channel 3

info on page 10 NOTE 3

FACT: on/off

info on page 15

15-second entry delay: on/off

info on page 11

Row 4

4th momentary

Sound 4: on/off
info on page 18

Add new remote to channel 4

info on page 10 NOTE 4

AutoActivate timed accessory

upon remote arming: on/off

this feature is for installers only

✱

Set headlight duration

1sec - 2min (30sec)

info on page 10 NOTE 6

Row 5

5th momentary

Sound 5: on/off
info on page 18

Erase all channels

info on page 22 NOTE 5

QuietChirps: on/off

info on page 18

Siren duration: 60/30 seconds

(1/2 chirps) info on page 18

Row 6

6th momentary

Sound 6: on/off
info on page 18

Headlight Reminder: on/off

info on page 16

Long-term chirp silencing: on/off

info on page 18

Set a new secret valet code

info on page 14 NOTE 7

✱

WARNING:

If you have remote window and sunroof closure,

DO NOT CHANGE THIS SETTING: it requires installer-only adjustment. Changing the duration may cause damage.

Please Note: There is a column 5 that contains installer-only features; do not change any of these settings. If you accidentally select column 5, turn off the ignition.

NOTE 1:

Transmit channel 1 (or other channel of your choosing) of the new

remote control. You will hear one chirp to confirm programming of channel 1.

NOTE 2:

Transmit channel 2 (or other channel of your choosing) of the new

remote control. You will hear two chirps to confirm programming of channel 2.

NOTE 3:

Transmit channel 3 (or other channel of your choosing) of the new

remote control. You will hear three chirps to confirm programming of channel 3.

NOTE 4:

Transmit channel 4 (or other channel of your choosing) of the new

remote control. You will hear four chirps to confirm programming of channel 4.

NOTE 5:

When you hear one chirp, all remotes will have been erased from the

system memory. You must now add the new and/or existing remote controls to
the system (i.e., program channels 1–4 of each remote that will be used with
your IntelliGuard 700-IQ).

NOTE 6:

The headlight timer starts as soon as you select this feature. When the

duration you wish has been reached, press button 1 on the remote control. You
will hear two chirps to confirm the new headlight timer duration.

NOTE 7:

Immediately flip the switch to its latched position, then:

a. Enter the new code you wish to use. The system will sound the same number of

chirps as the digit you choose when you move the switch to the latched side (e.g.,
if the first digit is 4, you’ll hear four chirps when you press the latched side).

b. Make sure to return the switch to its center position when complete.
c. Wait 3 seconds until you hear 2 chirps, indicating the new code has been

accepted.

d. Turn the ignition off. You’ll hear 3 chirps to confirm program mode exit and

the LED will turn off.

e. VERY IMPORTANT: You must immediately test your new secret valet

code: Turn the ignition on, enter your new code, then flip the switch to its
latched position. The LED will illuminate. If it does not, the new code you
programmed and the one you just entered do not match. The system has
reverted to the previous code.

for IG700IQ owners