beautypg.com

User-selectable features – CLIFFORD 100 User Manual

Page 7

background image

User-selectable features

Your ACE 100 vehicle security system allows you to set many of its features to
your own personal preferences. We have made the programming procedures very
simple: to make a change, you just flick the valet switch a few times. The system
comes from the factory with all of its features pre-programmed as noted in the table
below. To change any of the settings, use the following procedure. To restore the
feature to its factory setting, just repeat the procedure:
1. Select the feature you wish to program from the table below. Note the number of

flicks and chirps.

2. Turn your vehicle’s ignition switch to its “ON” position.
3. Immediately flick the valet switch back and forth, counting the number of chirps you

hear. Stop when you reach the number of chirps associated with the feature you wish
to program.

4. If noted, perform the “Secondary action.”
5. Wait 3 seconds. You will hear 1-5 chirps (as noted in the “Program completion

confirmation” column) and the LED will turn off. Turn the ignition off.

6. Repeat steps 1-5 for any other features you wish to program.

Feature

Factory

setting

# of

flicks &

chirps

Secondary

action

Program

completion

confirmation

Result

AutoArming

ON

4

1 chirp = OFF
2 chirps = ON

Change state from

ON to OFF or vice-versa

AutoArm

& Lock

OFF

5

1 chirp = OFF
2 chirps = ON

Change state from

OFF to ON or vice-versa

Tamper

Warning

OFF

11

1 chirp = OFF
2 chirps = ON

Change state from

ON to OFF or vice-versa

FACT

ON

12

1 chirp = OFF
2 chirps = ON

Change state from

ON to OFF or vice-versa

Add a new

remote to
channel 1

(arm/disarm)

13

Press remote control button I

1 chirp

Button I/channel 1 code

of the new remote control

has been memorized

Add a new

remote to

channel 2

(remote

accessory)

14

Press remote control button II

2 chirps

Button II/channel 2 code

of the new remote control

has been memorized

Add a new

remote to
channel 3

(silent

arm/disarm)

15

Simultaneously press remote

control buttons I+II

3 chirps

Buttons I+II/channel 3 code

of the new remote control

has been memorized

6