Compaq TFT 1501 - Manual (Page 36)

32
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the
monitor to operate on input voltages between 100-120V or 200-240V.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for
use in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that
is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the
product’s electrical ratings label. The voltage and current rating of the cord should be greater than
the voltage and current rating marked on the product. In addition, the cross-sectional area of the
wire must be a minimum of 0.75mm
2
or 18AWG, and the length of the cord must be between 6
feet (1.8m) and 12 feet (3.6m). If you have questions about the type of power cord to use, contact
your HP authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed
upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point
where the cord exits from the product.
Recycling your Product
HP has a strong commitment toward the environment. Your Compaq monitor has been designed to
respect the environment as much as possible.
HP can also take back your old monitor for recycling when it reaches the end of its useful life.
HP has a product take-back program in several countries. The collected equipment is sent to one of
HP's recycling facilities in Europe or the USA. As many parts as possible are reused. The remainder
is recycled. Special care is taken for batteries and other potentially toxic substances, which are
reduced to non-harmful components through a special chemical process. If you require more
details about HP's product take-back program, contact your dealer or your nearest HP Sales
Office.
This product contains the following materials that may require special handling at end-of-life:
mercury in the liquid display.