CDA CI230 - Manual (Page 9)

INSTALLING THE WASHING MACHINE UNDER A KITCHEN
WORKTOP AND PRE-CLEANING
When your washing machine has been
correctly installed, we recommend that you
pre-clean the machine.
This is to check that the installation, the
connections and the drainage are all correct,
and to thoroughly clean the inside of the
washing machine before any wash
programmes are run (see the operating
instructions on the following pages).
a Select the normal programme at 60ºC.
b Press the Start/Stop button.
9
4
PRE-CLEANING
INSTALLATION UNDER
A WORKTOP
Your washing machine may be fitted
underneath a kitchen worktop.
If you need to remove the washing machine’s
worktop, for safety reasons you need to fit a
protection plate which you can obtain from
your Dealer or CDA Customer Care.
Follow these steps to fit the plate:
a Remove the washing machine work top
by taking out the side screws and
moving it gently back.
b Take out the screws and remove the
parts holding the worktop in place.
c Put the protection plate into place and
screw it to the washing machine so it
can then be inserted in the place you
wish, fitting spongy adhesive all around
the perimeter first to prevent noise.
c
a
b
Quick 30’
Prewash 60º Rinse Spin
WOOL
O
a
STAR
PAUS
b