ClearSounds A300E - Manual (Page 10)

10 – ENGLISH
█ Handset Name
This feature allows you to give each registered handset a name
in order to easily recognize each handset if you have more than
one registered to the base. To set the handset name:
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to HS Settings and
then press the Select soft key.
3. Press up or down to scroll to HS Name and then
press the Select soft key.
4. Enter the handset name (up to 12 characters) by using
the keypad and then press the Save soft key to confirm
and exit. The handset name will be displayed above
your handset number in standby mode.
NOTE:
If you make a mistake while entering the name, use the
Erase
soft key to correct it. Each time you press this key, the
last character is deleted.
█ Handset Reset
This function allows you to reset the handset settings for Alarm,
Audio Setup, Ring Setup, Tone Setup, Language, HS Name,
Auto Answer and Date & Time to the initial factory settings. To
reset the handset:
1. Press the Menu soft key to display the main menu list.
2. Press up
or down to scroll to HS Settings and
then press the Select soft key.
3. Press up or down to scroll to HS Reset and then
press the Select soft key. You will be prompted to enter
the PIN.
4. Enter the PIN (the default PIN is 0000) and then press
the Reset soft key. If the PIN is validated, the handset
settings will be reset to the initial factory settings,
otherwise the settings will remain.
PHONE HANDSET SETTINGS