Abu Garcia Abumatic Spincast User Manual
Page 4
conditions may require different settings. Any drag setting above half of the line strength risks
line breakage.
If a spring scale is unavailable, tie the line to a secure point. With the rod tip up (about a 45
degree vertical angle), apply pressure by turning the handle. Gradually tighten the drag by
adjusting the drag knob or drag star. When the line approaches its breaking point, loosen the
adjustment dial ¼ turn.
G. REEL FUNCTION
- Basic Casting Technique -
a) Hold the rod and reel so that that the reel is facing up. Depress and hold the thumb button to
disengage the pick-up pins.
b) Holding the rod and reel in front of the body, bring the rod backward so the tip reaches a
point above and behind the shoulder. To cast, bring the rod back in front of the body in a single
motion without stopping
c) Release the thumb button as the rod is brought forward so that the lure is launched slightly
upward and outward toward your target.
d) Turn the handle forward to engage the line pick-up pins and begin your retrieve. Maintain
moderate tension when retrieving the line by pinching the line between your thumb and index
finger if needed.
H. MAINTENANCE
To keep your reel working at peak efficiency, clean and lubricate after each use. At least once a
season your reel should be disassembled for a thorough cleaning and re-lubrication. Refer to the
exploded parts view supplied with your reel. Reel maintenance kits can be purchased at your
local tackle store and include everything you need to properly service your reel. If you do not
wish to perform this work yourself any nearby
is fully qualified to do
this for you.
We also recommend that you:
Periodically unscrew the front cover; remove all dirt and debris. Lightly oil moving
parts.
Store your reel away from direct sunlight and temperature extremes.
I. LIMITED WARRANTY