AAXA Technologies M1 Plus - Manual (Page 10)

9
10
Possible A/V sources: Composite (included), Iphone / Ipod (optional), Zune
(optional), Playstation Portable (optional), and others. Please check
www.aaxatech.com or your AAXA dealer for optional A/V cables.
CONNECTING TO USB DISPLAY
USB-Display is not supported on the “standard” model of the M1 projector.
Third party software is available to enable the USB Display feature. However
AAXA Technologies does not support the USB Display feature. Please visit our
website for more information at www.aaxatech.com .
Possible A/V sources: Composite (included), Iphone / Ipod (optional), Zune (op-
tional), Playstation Portable (optional), and others. Please check www.aaxatech.
com or your AAXA dealer for optional A/V cables.
To connect an A/V cable insert the 3.5mm portion into
the A/V port of the projector. Then click on either the
“A/V input” icon in the main menu, or press “source” on the
remote control and select “A/V input”. A blue screen will
appear and the Projector will be ready to accept an A/V
signal.
9
Connecting an Audio/Video input source - The Projector can accept different
A/V (Audio/Video) sources through the A/V port. These sources are connected
through a 3.5mm A/V cable.
To connect an A/V cable insert the 3.5mm portion into the A/V port of the
projector. Then click on either the “A/V input” icon in the main menu, or press
“source” on the remote control and select “A/V input”. A blue screen will appear
and the Projector will be ready to accept an A/V signal.
MAXIMUM SUPPORTED RESOLUTIONS
NTSC: 720x480
PAL: 720x576
ACCESSING ThE ONBOARD MEMORy
The M1 Plus projector includes 1GB of onboard memory for storage. To access this
memory connect a USB cable to the back of the projector. Then select the “USB
Data” function in the main menu.
The computer should auto-detect the connected projector and its onboard mem-
ory as a “flash drive”. Double-click the drive to open the drive contents and ma-
nipulate as a standard USB flash drive.