beautypg.com

High speed grill – Cannon Kendal Pressure Cookers User Manual

Page 20

background image

20

HIGH SPEED GRILL

CAUTION: Accessible parts may become hot when the grill is in use - children should be

kept away.

Your cooker is not fitted with a conventional type of grill. The high speed grill is

designed to reduce your grilling times. It is quicker because it takes less time to warm

up from cold. Conventional grills require 5 minutes pre-heat before food is placed

beneath them, but for normal grilling the high speed grill can be used from cold

without any pre-heat. However, when toasting, optimum performance is achieved by

preheating the grill for about 1 minute.

Note:

You will notice that the grill elements are protected by a wire mesh. This stops you

from touching live parts.

DO NOT under any circumstances insert objects into the grill mesh as this could

damage or break the element tubes OR if the grill is on cause an electric shock.

During use the mesh may become soiled. Do not attempt to clean it while the grill is

still on. Turn the cooker off at the control unit and wait until it has cooled down before

cleaning.

Care must be taken to ensure the grill mesh is not distorted - DO NOT store the grill

pan handle on the grill pan grid when the rod shelf is in the top runner position.

There are two halves to the grill, one on the left and one on the right. You can choose

to have both sides on or just the left side on. Turning the control knob clockwise, will

switch both sides on. Turning it anticlockwise, will only switch the left side on. The

numbers which are displayed indicate the heat setting. Number 4 is the hottest and

number 1 the coolest.

GRILLING SHOULD NOT BE UNDERTAKEN WITH THE GRILL/TOP OVEN

DOOR CLOSED - This will cause overheating.

The grill will not operate unless the top oven control is in the '0' Off

position.

Grilling procedure

1. Open the grill/top oven door fully.

2. Position rod shelf as recommended in the chart (next page) for food being cooked.

3. Place the grill pan on the rod shelf, ensuring it is positioned centrally under the

element.

4. Never line the grill pan with aluminium foil as this may cause overheating of fat in

the grill pan.