CREATIVE WP 450 - Manual (Page 4)

EN
Thank you for selecting Creative WP-450 wireless
headset. This documentation aims to guide
you in making full use of the headset. Fully charge
the headset before first use. Then you need to “pair”
the headset once with your Bluetooth audio or mobile
device before enjoying subsequent automatic connection.
Charging headset
• Connect the Left earcup to your laptop or computer
using the supplied USB cable
• On the Left earcup, the indicator lights up in Red.
When fully charged, this indicator turns Green
• You can listen and operate the headphones while
charging
Pairing new Bluetooth devices
• Press and hold the Multifunction button for more than 5
seconds on the Right earcup until the indicator lights up
in Blue and blinking rapidly
• Turn on Bluetooth search function on your audio or
mobile device
• Select “Creative WP-450 Headset” and if prompted for a
Passcode, key in “0000”
• Once paired, the Blue indicator on the Right earcup
blinks slowly
• Note that when pairing with a computer, connect the
headset as a Hands-free Audio or Headset device
instead of a Stereo Audio device in order to make
use of the microphone function. If microphone function
is not needed, it is recommended to connect as a Stereo
Audio device for better playback performance. Certain
Bluetooth solution detects the application that you are
using and configures the microphone automatically. You
are recommended to update your computer’s Bluetooth
drivers to the latest.
Playback from audio devices
• Turn on Bluetooth function on your paired audio device
• Press and hold the Multifunction button on the Right
earcup until the indicator lights up in Green and blinks
slowly. The headset automatically searches for the last
paired device. Once connected, the indicator turns Blue
and blinks slowly. In certain cases, you may need to
press the Play button to establish connection
• You can now Play or Pause music playback, skip forward
or reverse tracks, and make volume adjustments
Call functions with mobile phones
• Turn on Bluetooth function on your paired mobile
device
• Press and hold the Multifunction button on the Right
earcup until the indicator lights up in Green and blinks
slowly. The headset automatically searches for the last
paired device. Once connected, the indicator turns Blue
and blinks slowly. In certain cases, you may need to
press the Multifunction button to establish connection
• To activate voice dialling when no call is in progress,
press the Multifunction button for about 1 second until
the mobile phone starts voice dialling, and proceed as
described in your mobile phone’s user guide.
• To redial the number you last called when no call is in
progress, press the Multifunction button for 2 seconds
and release
• To answer or end a call, press and release the
Multifunction button. To reject a call, press the
Multifunction button for 2 seconds and release
• To accept a call waiting and drop the ongoing call,
press and release the Multifunction button. To accept a
call waiting and put on hold to the ongoing call, press
the Multifunction button twice. To accept a call waiting
and join to the ongoing call (three-way call), press and