Crest Audio LQ 10P - Manual (Page 14)

14
A Arrc ch hiitte ec cttu urra all & & E En ng giin ne ee erriin ng g S Sp pe ec ciiffiic ca attiio on nss
The input signal is electronically divided into high frequencies and low
frequencies by a staggered pole, third order slope line-level crossover at
2 kHz.The low frequencies are processed to provide bass boost, subsonic
filtering and overall response shaping, and the high frequencies are equalized
for constant-directivity horn EQ and response shaping.
The enclosure is constructed of injection-molded polypropylene of 1/4"
nominal thickness with a UL flame rating and internal reinforcing ribs. A
vinyl-coated, perforated metal grille protects the woofer.The cabinet
incorporates four tall, sturdy rubber feet for floor-standing use and four
mounting point inserts on the top and bottom each for flying use.
The outside dimensions are 18.88" H x 14.00" W x 13.13" D, and weighs
36 lbs. Power requirements: Nominal 100 Watts, 120 VAC, 60 Hz domestic
and 240 VAC, 50 Hz (European).