Compaq TFT8030 - Manual (Page 27)

When adjusting the Clock and Clock Phase values, if the monitor
images become distorted, continue adjusting the values until the
distortion disappears. To restore the factory settings, select Yes
from the Factory Reset menu in the on-screen display.
Display Resolutions
The display resolutions listed below are the most commonly
used modes and are set as factory defaults. This monitor
automatically recognizes these preset modes and they will appear
properly sized and centered on the screen.
Factory Preset Display Modes
Pre-
set
Pixel
Format
Horz
Freq
(kHz)
Horz
Polarity
Vert
Frep
(Hz)
Vert
Polarity
Pixel
Clk
(MHz)
Source
1 640 x 350 31.47 + 70.09 - 25.175 VGA
2 640 x 480 31.47 - 59.94 - 25.175 VGA
3 640 x 480 37.50 - 75.00 - 31.500 VESA
4 640 x 480 43.27 - 85.01 - 36.000 VESA
5 720 x 400 31.47 - 70.08 + 28.321 VGA
6 800 x 600 37.88 + 60.32 + 40.000 VESA
7 800 x 600 46.88 + 75.00 + 49.500 VESA
8 800 x 600 53.67 + 85.06 + 56.250 VESA
9 832 x 624 49.72 +/- 74.55 +/- 57.283 MAC
10 1024 x 768 48.36 - 60.00 - 65.000 VESA
11 1024 x 768 60.02 - 75.03 - 78.750 VESA
12 1024 x 768 68.68 + 85.00 + 94.500 VESA
13 1152 x 870 68.68 +/- 75.06 +/- 100.00 MAC
TFT8030 User’s Guide 25